Off the top of my head...
1. unhook the spring from the peg on the breaker plate
2. detach the little crimp ring or c-clamp from the end of the
advance/retard adjuster
3. unscrew the adjusting wheel all the way off the end of the bar
on 6/7/02 6:41 AM, Bill Mills at williem@mindspring.com wrote:
> I want to swap the vacuum advance unit from one Lucas 25D to another. How
> do you detach/re-attach the vacuum unit (the old one has a leaking
> diaphram).?
>
> Bill
> Raleigh
> '74 'BGT
>
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|