mgs
[Top] [All Lists]

RE: Electrical connector

To: "'Douglas Gaither'" <dgaither@northeastassembly.org>,
Subject: RE: Electrical connector
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Thu, 13 Jun 2002 10:41:52 -0700
Doug:

        Regular crimp on insulated female spade connectors work just fine.

Kelvin.



> -----Original Message-----
> From: Douglas Gaither [mailto:dgaither@northeastassembly.org]
> Sent: Thursday, June 13, 2002 10:36 AM
> To: mg list
> Subject: Electrical connector
> 
> 
> My father has a '73B.  His light switch died.  The original 
> switch had been
> replaced with a round pull type.  I decided to replace with 
> an original
> illuminated rocker type.  But the electrical plugs are different.
> Apparently whoever switched switches also switched plugs.  
> So, does anyone
> out there have an electrical plug for a headlight switch for 
> a '73B?  It
> should have three live connectors.
> 
> Doug Gaither
> '66 will-this-be-the-year MGB

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>