mgs
[Top] [All Lists]

RE: couple of parts questions

To: "'Chuck Renner'" <crenner@dynalivery.com>, mgs@autox.team.net
Subject: RE: couple of parts questions
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Fri, 21 Jun 2002 12:06:37 -0700
Chuck:

        You have inspected the bush, and it has been found wanting.

        Yes, it's bad.  The good news is that it is easy to remove now.  :)

K.


> > > While everything is apart, should I replace the pilot 
> > bushing that the
> > > tranny input shaft rides in on general principle?  
> > 
> > 
> > I'm a proponent of "if it's not broke, don't fix it"
> > 
> > Removing and reinstalling the pilot bush can be a tricky job. 
> >  The bush is a
> > press fit, so it should not be easy to remove.  I would only 
> > do so if the
> > bush is damaged, or excessively worn.  Inspect the bush, if 
> > it is in the
> > least bit questionable, then replace with one of the same length.
> 
> Well, I can pull mine out by sticking my finger in it....I'm 
> guessing from
> your description it's supposed to be a tighter fit...> 

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>