mgs
[Top] [All Lists]

Fwd: V1 #1196

To: chnittke@mindspring.com, mgs@autox.team.net
Subject: Fwd: V1 #1196
From: Joseph Cianciotti <jmc987@earthlink.net>
Date: Tue, 18 Feb 2003 16:22:46 -0500
I had a 4-synchro OD conversion done by Doug Jackson himself. The 
cosmetics of it are rather simple. There is no "bashing". The opening 
for the shifter in the transmission tunnel has to be extended backward 
to accommodate the taller and longer tranny. With requires some 
cutting. The cover is fiberglass and the same shape as the original 
cover. It just extends backward a couple of inches. I even had the 
original teardrop shifter re-tapped so that it would fit on the new 
stalk. We put a "shepherd's crook" OD switch on the dash where the 
original would be. All in all it's a very neat installation. And it's 
so close to the original very few people would notice the different. 
That's my two cents. By the way, I have no connection with British 
Automotive. I'm just a satisfied customer.

Joseph
67 MGB Roadster

Begin forwarded message:

> Date: Tue, 18 Feb 2003 00:55:13 -0600
> From: Glenn Schnittke <schnittke@mindspring.com>
> Subject: British Automotive Tranny kit
>
> Has anyone here played with the Trans tunnel cover supplied by British
> Automotive?
>
> The first gear cluster in my '67 redcar (daily driver) just bit the 
> dust.
> While I was planning on swapping to the trans & OD from the '69 
> eventually,
> I was figuring on cutting the tunnel out of the primrose for use and 
> doing
> all the bodywork (it needs rockers as well) at once - six or nine 
> months
> from now, instead of NOW. My friend Ray has an early crashbox he can 
> loan
> me, but I'd like to find out about the tunnel cover BA has and whether 
> it's
> worth taking the extra time to do the swap now as opposed to later. I 
> get
> the idea from the information on their site that there's still some 
> bashing
> involved. I have the engine with later backplate, starter motor to fit,
> flywheel, speedo & cable, oil filter adapter is already installed, 
> already
> changed out the genny to later alternator, etc. It's mostly the 
> bashing I'm
> interested in.
>
> And I still haven't heard about anyone with a design for the OD switch.
>
> Thoughts?

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>
  • Fwd: V1 #1196, Joseph Cianciotti <=