mgs
[Top] [All Lists]

Re: Spring, stock length and arch

To: "Larry Colen" <lrcar@red4est.com>, <mgs@autox.team.net>
Subject: Re: Spring, stock length and arch
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Tue, 18 Mar 2003 09:53:59 -0000
There are various measurements and specs at
http://www.mgb-stuff.org.uk/wn_suspensionframe.htm then click on 'Ride
Height'.  That shows around 100 lb in rates at both front and back, doesn't
that tie in with an approximate 50/50 front/rear balance?

----- Original Message -----
From: "Larry Colen" <lrcar@red4est.com>
To: <mgs@autox.team.net>
Sent: Sunday, March 16, 2003 5:50 AM
Subject: Spring, stock length and arch


> I did some more research and found out that the stock spring rates for
> the MGBGT are 480 lb/in in the front and 99 lb/in in the back. By any
> chance does anyone have new springs lying around that they can measure
> the free length and unloaded arch? This would save me the fun of
> taking them out of my car to measure.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>