Yes, fuel is normally in there. Never seen a problem. Use Permatex
Aviation sealer to seal the sender after making sure the surface of the
tank and sender are clean and straight.
Regards,
Lew Palmer
-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On
Behalf Of Mike Duvall
Sent: Monday, March 31, 2003 10:20 AM
To: mgs@autox.team.net
Subject: fuel level sendingunit
On the fuel sending unit on a TD and A, does the unit have a seal to
keep
the gas from getting into the variable resistor? My unit is dripping out
the
back plate. Should gas even be in there?
Mike
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|