Surely the other way round if they are handed - in order to tighten as you
travel forward like wire-wheel spinners?
----- Original Message -----
From: "Dodd, Kelvin" <doddk@mossmotors.com>
To: "'Dave B. Hammond'" <dbh@hamengr.com>; "MG List" <mgs@autox.team.net>
Sent: Wednesday, April 30, 2003 7:58 PM
Subject: RE: mga rear axle
> Remember too that the nuts are handed. R/H thread on the Right, and L/H
> thread on the left.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|