Not really. Fastened all round at the top and to the heel board the only
difference is that with the tonneau bars there is a sharp change from the
horizontal to the vertical, without there is a more gradual change. Hardly
noticeable without the two side-by-side.
----- Original Message -----
From: "David Breneman" <idcb@airborne.com>
To: <mgs@autox.team.net>
Sent: Tuesday, May 27, 2003 5:33 PM
Subject: Re: MGB tonneau bars ?
> ... I would think that even
> with a folding top, the tonneau cover would lay all haphazardly
> across it whithout using the bars to draw it tight in the open
> position.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|