Paul,
Original switch has 4 posts 1-red 2-blue 3-brown
4-purple. The purple appears to be interior lights.
I'm trying to determine if I need to find an NOS
switch or can I put the purple with the blue or red
post.
--- "Telewest (PH)" <paul.hunt1@blueyonder.co.uk>
wrote:
> Don't have any MGC diagrams but I can't imagine what
> the purple would be for
> there, sounds like a PO addition. Does it come out
> of the loom or is it
> loose? If loose where does it go? Purple on the
> MGB is fused, always hot,
> for things like the horn and interior lights. Does
> the old switch have four
> terminals? Or was the purple attached to the same
> terminal as one of the
> others? Is the purple connected to anything i.e.
> what happens if you
> connect a fused 12v supply to it? Or does it show
> 12v when something else
> is switched on? If the front running lights didn't
> come on with the other
> three wires connected then maybe that wire (red on
> an MGB) is damaged up
> front somewhere and the PO ran in a purple to bypass
> it. In which case it
> should go with the red on the switch.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|