You should be able to tell if the pistons are all the way in. Just look at
them. They should be flush with the inside of the caliper. If they are and
the pads won't fit the friction material is to thick.
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net] On Behalf Of Paul M.
> Sent: Friday, November 07, 2003 3:07 PM
> To: mgs@autox.team.net
> Subject: Brake pad question
>
>
> I need a little help. I'm replacing the front brake
> pads in my 1971 MGB with "V8" pads purchased from
> Brit-Tek. It seems that when I push the pistons back
> into the calipers, there still isn't enough room for
> the new pads to fit in between the rotor and the
> piston.
|