Must be very minute, and low density, despite the intensity of the colour.
I tested some with an ohmmeter on its most sensitive range and could not get
any conductivity until the probes actually touched. Still use it for
assembly of most metal to metal parts, or Waxoyl if there is rubber nearby.
PaulH.
----- Original Message -----
From: "Barrie Robinson" <barrier@bconnex.net>
To: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>; "bernd"
<bernd.vabeach@erols.com>; <mgs@autox.team.net>
Sent: Tuesday, March 30, 2004 6:18 PM
Subject: Re: spline grease
> I seem to remember that "copper" grease was meant to be good. This has
> minute particles of copper which prevent seizing under high
> pressure!
|