You should be able to locate and buy a used one. When I had this problem,
many years ago, I was able to buy a short block from a salvage yard. But
you may not have to go that far.
I did notice that British Masters sells used crank shafts for $200 -
http://www.usedbritishcarparts.com/main/mgb.htm
I haven't dealt with them yet but you can use that for reference or for a
starting point. But being that you are in Tucson, you may even have a local
or somewhat local supplier of used parts.
David Councill
67 BGT
72 B
At 09:56 AM 6/2/2004 -0700, Richard wrote:
>Hi all,
>
>I just found out from my engine rebuild shop that my crank had been ground
>to the max at one bearing point (a no-no), so I need a replacement. Does
>anyone out there know of a used crank available for a 18V 5 main bearing
>engine?
>
>Rich
>72 B
>Tucson, AZ
|