It's 'tother way round. You fix the metal channels to the screen uprights
then pull the rubber seals into them, some hand-cleaner helps. If you mean
the seals the 1/4-lights close onto, that is, I can't think what else you
would mean.
PaulH.
----- Original Message -----
From: <RobertS355@aol.com>
To: <mgs@Autox.Team.Net>
Sent: Monday, November 22, 2004 1:59 AM
Subject: Windshield Seal Stumper
> ... I cut the old one to get them out
> but can't figure out how you get a screwdriver in there to fasten the new
> ones.
|