Re: sizing correct bottom end bearings

mgs

Re: sizing correct bottom end bearings

To:	"mg listserve" <mgs@autox.team.net>
Subject:	Re: sizing correct bottom end bearings
From:	"Maynard Hirsch" <mghirsch@netzero.net>
Date:	Sun, 17 Apr 2005 19:37:55 -0500

If the bearings are the original size, there will be no size marked. 
Otherwise look for something like 0.020 which would mean the crank is 20 
thousands undersize.

Maynard

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: sizing correct bottom end bearings, Maynard Hirsch <=

Previous by Date:	Re: Sizing correct bottm end bearings.., Larry Hoy
Next by Date:	Re: Sizing correct bottm end bearings.., mgamgb
Previous by Thread:	Bering sizes, Richard
Next by Thread:	Re: [MG-MGB] update on clutch battle, Paul Hunt
Indexes:	[Date] [Thread] [Top] [All Lists]