Careful with the little pin - I've lost it as I pressed it too hard.
Now the know is not really fixed anymore to the shaft.
With some paper in between the knob is fixed sufficiently not to fall off.
Cheers,
Hans
'71 BGT
----- Original Message -----
From: <RobertS355@aol.com>
To: <mgs@autox.team.net>
Sent: Thursday, May 12, 2005 3:20 AM
Subject: Heater Control Knobs - Thansk
> Thanks to all who responded to my question on getting the knobs off. Have
> found the hole and "plunger" in the knob but they sure don't move.
> Hopefully
> sitting overnight with a little WD-40 will help.
>
> Thanks again.
>
> Bob
> '63 MGB
|