My 80 had a steering wheel squeek - turned out to be a very tight turn
signal switch. Replacing it was the only permanent cure...
Marc
Howard Battan wrote:
>Nice try, but the '79 B has the horn on the turn signal stalk, not on the
>wheel. There is a plastic bushing on the turn signal/horn/dimmer switch
>assembly that was pretty well worn. The new switch I put in came with a new
>bushing, so hopefully that will cure the noise problem. I'll know when it
>stops raining and I can test-drive it.
>
>Howard Battan
>'57 A
>'79 B
>
>-----Original Message-----
>From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On Behalf
>Of Paul Hunt
>Sent: Thursday, September 29, 2005 11:33 AM
>To: Howard Battan; mgs@autox.team.net
>Subject: Re: '79 "B" steering column squeek
>
>Are you sure it isn't where the horn brush contact rubs on the slip-ring of
>the wheel? Spot of grease should fix that.
>
>PaulH.
[demime 1.01d removed an attachment of type application/x-pkcs7-signature which
had a name of smime.p7s]
|