Re: Transmission bolt size question

["Paul Hunt" <paul.hunt1@blueyonder.co.uk>]

You will need to 'lock' the output shaft in order to undo (and do up, 55-60
lb ft for LH-type OD, 100-130 lb ft for D-type OD, 150 lb ft no OD) the nut.
A 'C'-shaped bit of metal that bolts to a couple of the studs and clears the
flange nut, with an arm that can rest on the edge of the transmission tunnel
should do the trick.

PaulH.

----- Original Message ----- 
> 1-1/8" socket.  Right hand thread.