> How do I test the output of the dynamo? I have an extra dynamo which is
> sitting on the workbench.
Put a well-charged 12 V battery on your workbench, as well as two pieces of
Use one wire to connect the dynamo body to the (-) battery terminal.
Connect D and F together with another wire and connect it to the (+) terminal
of the battery.
If the dynamo now speeds off the workbench it WAS OK :-)
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal f|r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer