mgs
[Top] [All Lists]

[Mgs] Oil ine fitting - HELP!

To: <mgs@autox.team.net>
Subject: [Mgs] Oil ine fitting - HELP!
From: "Craig Straub" <craigstraub@sbcglobal.net>
Date: Fri, 10 Aug 2007 16:58:50 -0500
About 2 weeks ago I put my freshly rebuilt engine that was done by a machine
shop back in the car.  I started to hook up the ancillaries and found that I
had a problem.

The machine shop had put the oil line fitting in backwards that  is towards
the rear of the engine.  Normally this fitting takes a 1" socket however there
is a slight factory bulge in the metal line not allowing the socket to slip
over.

Does any one have a suggestion on what to do other than pulling the engine out
again and taking off the back plate?

Thanks,

Craig
_______________________________________________

Edit your replies

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

<Prev in Thread] Current Thread [Next in Thread>