Oliver, my A60 Ute has a banjo bolt that attaches the pipe to the filter
head that often requires a little tightening. It doesn't take much
loosening to really kick out some oil.
You might want to take a look at that -- it's worth a try anyhow.
Larry Daniels
79 MGB LE
60 Bugeye
67 Austin A60 Pickup (Ute)
"You only need two tools: WD-40 and Duct Tape. If it
doesn't move and should, use the WD-40. If it
shouldn't move and does, use the duct tape."
----- Original Message -----
From: "oliver" <sumton@sbcglobal.net>
To: "MG List" <mgs@autox.team.net>
Sent: Sunday, October 07, 2007 4:39 PM
Subject: [Mgs] oil leak
Hi, all.
apparently i have an oil leak. apparently it is leaking down onto the frame
way up front, under the oil filter or farther forward.
is there a usual suspect in this area or do i need to get it up and get
under and do some serious detective work?
should i be looking at switching to stainless steel hoses if, what i think
is true, its in the oil cooler hose connections to the oil filter?
thanks!
early 73 mgb roadster
_______________________________________________
ladaniels@sbcglobal.net
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
--
No virus found in this incoming message.
Version: 7.5.488 / Virus Database: 269.14.3/1054 - Release Date: 10/6/2007
7:12 PM
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|