mgs
[Top] [All Lists]

Re: [Mgs] Rear axle nut socket

To: "Rick Lindsay" <rolindsay@yahoo.com>, "MGS" <mgs@autox.team.net>
Subject: Re: [Mgs] Rear axle nut socket
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date: Thu, 27 Dec 2007 14:48:42 -0000
Got mine off the shelf from the local (UK) place.  If you get a 1/2" drive 
non-impact you *should* be OK, it's the 3/4" and impact that may be too big. 
The hubs seem to have an ID of around 1.8", and my socket is 1.73".

PaulH.

----- Original Message ----- 
>   You guys found a good source for a thin-wall socket
> to fit the rear axle nut on a wire-wheel '70 B?
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>