I would drill the 'spring' that lies behind the bumper and runs between the
over-rider bolt and the chrome headed bolt outboard of that and attach a
right-angle bracket to that. If you used a right-angle bracket with
clamping plate and two nuts and bolts you wouldn't even have to drill that
spring and could adjust the position of the lamps.
PaulH.
----- Original Message -----
> ... Not sure if drilling thru the valance and
> fabricating some brackets is the way to go, but seems like the only
> option.
> Does anyone have any other suggestions or ideas. Thanks
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|