mgs
[Top] [All Lists]

Re: [Mgs] MGA front hub bearing removal

To: <british-cars@autox.team.net>, "mgs mgs" <mgs@autox.team.net>, "Mike
Subject: Re: [Mgs] MGA front hub bearing removal
From: "Rick Brown" <mgrick@mgcars.org.uk>
Date: Fri, 25 Jul 2008 19:19:58 -0400
Mike

I believe this will help you with removing the bearings:

http://mgaguru.com/mgtech/universal/ut108.htm

Always go to Barney Gaylord's site when you have an MGA question - the 
answer is usually there. mgaguru.com

Rick
Webmaster for:
___________________________________________________________
  http://www.mgcars.org.uk/namgbr  - The North American MGB Register
  http://www.mgcars.org.uk/mgcouncil -  North American Council of MG 
Registers
  http://www.britishcarclub.net - The Suncoast Classic MG Club and Nature 
Coast English Car Club
----- Original Message ----- 
From: "Mike Duvall" <duvallcom@sbcglobal.net>
To: <british-cars@autox.team.net>; "mgs mgs" <mgs@autox.team.net>
Sent: Friday, July 25, 2008 19:06
Subject: [Mgs] MGA front hub bearing removal


> How do I remove the bearings from the front hubs on an MGA?  I assume
> each bearing pulls out the sleeve in the center prevents using some
> kind of puller.  The only method I can think of is to get a punch on
> the inner edge and try to tap it out.
>
> Any better suggestions?
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>