If by a gasket you mean a tiny fiber washer, yes. Although if you have the
non-adjustable replacement plastic floats, you might have to eliminate the
washer, or stack up two of them, to achieve the correct float height.
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
on 8/29/08 5:36 PM, Bernd at 1971mgb@cox.net wrote:
> On the HS-4 carbs is there a gasket that goes on top of the Needle and Seat?,
> on top of the threaded part of the Seat, it's located in the fload bowl. Moss
> does not show one, on part number 373-626, item 33. I've heard that unless
> there is a gasket in that location, gasoline can seep through. Confused as
> usual.
> 71 MGB
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|