1) Open a bleed screw on a brake caliper/cylinder on the opposite end of the
car from the leak.
2) Have an asisstant push the pedal down <slowly> until the light goes out.
3) Close bleed screw.
You have to do the same thing after bleeding the brakes.
-----Original Message-----
Date: Mon, 29 Sep 2008 09:18:40 -0400
From: Paul Osborne <paul@ece.rochester.edu>
Subject: [Mgs] Brake warning light ON
To: mgs@autox.team.net
How do you re center the brake warning switch ? Had a rear wheel
leak and the light came on , now can not get it to go out.
paul
--
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul@ece.rochester.edu
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|