mgs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Mgs] manifold vacuum

from [Ed Woods] [Permanent Link][Original]
To: "Bob Howard" <mgbob@juno.com>, <mgs@autox.team.net>
Subject: [Mgs] manifold vacuum
From: "Ed Woods" <fogbro1@comcast.net>
Date: Thu, 23 Jul 2009 09:46:54 -0400 
List,

What's the expected manifold vacuum on the MGB at 900 rpm? Mine's reading 
16-17. Should it be rock steady or is a variation of 1 inch acceptable?

Anybody out there using a Pertronix distributor? With the vacuum advance 
connected, "idle" speed goes to 2000 and ignition advance to 30 degrees from 
a 7 degree advance when disconnected!

Ed Woods 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Mgs] Triumph content - delete now if offended, Dan DiBiase
Next by Date:  Re: [Mgs] MGB Windscreen, Ed Woods
Previous by Thread:  [Mgs] Triumph content - delete now if offended, Rick Lindsay
Next by Thread:  Re: [Mgs] manifold vacuum, Paul Hunt
Indexes:  [Date] [Thread] [Top] [All Lists]