mgs
[Top] [All Lists]

Re: [Mgs] Crank pulley

To: MGTD51 <mgtd51@comcast.net>,mglist <mgs@autox.team.net>
Subject: Re: [Mgs] Crank pulley
From: Barney Gaylord <barneymg@mgaguru.com>
Date: Wed, 29 Jul 2009 13:34:26 -0500
At 07:13 AM 7/29/2009 -0400, Larry Swift (MGTD51) wrote:
>I am in the process of rebuilding my 67 B motor.  I assume the crank 
>pulley should be flush with the end of the crankshaft, but it sits 
>about 3/32nds of an inch proud of the end of the crankshaft.  Is this an issue?

It's normal.  The shaft must be slightly recessed for the crank nut 
to hold the pulley tight.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>