The machine shop needs to grind the stems of the valves. They cut the
seats too deep.
Sent from my iPhone
On Oct 3, 2009, at 7:22, "Tom Gunderson" <firstname.lastname@example.org> wrote:
> I have had my 1500 head machined. New seats and guides ,.003
> surfaced. I put
> the rocker arm on and I have 2 of the rockers that will not adjust
> when the
> head is mounted on the block. The adjustment screws are all the way
> up and the
> 2 rockers are tight. The lifters and rods look like they are in the
> alinement. What can I do?
> Tom Gunderson,
> 1500 mga rst
> Support Team.Net http://www.team.net/donate.html
Support Team.Net http://www.team.net/donate.html