mgs
[Top] [All Lists]

Re: [Mgs] Pitted tappets

To: MG List <mgs@autox.team.net>
Subject: Re: [Mgs] Pitted tappets
From: Max Heim <max_heim@sbcglobal.net>
Date: Mon, 05 Oct 2009 16:49:44 -0700
It means they have worn through the hardened surface, and need to be
replaced. The cam will probably be in the same state. But then, you weren't
going to replace the cam without replacing the tappets.


--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires



on 10/5/09 4:14 PM, Elliott and Martha DeGraff at degraff@erols.com wrote:

> I'm tearing down an engine for rebuild and the tappets are pitted on the
> camshaft mating surface.  They feel smooth to the touch.  Is this normal
> or do I have to buy new tappets?

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>