I used a universal hold down from the local parts store. It fits fore
and aft on the short side. Needed to drill the front and rear battery
holder for the J bolts. I think it worked out very nice. (sending
photos to Craig).
Allen Hess
> Hmm, the problem with reusing the factory holddowns is that there
> isn't room
> on the sides for the long bolts. So I don't see how this kit would
> work
> either, with my battery. Obviously, batteries vary in dimensions --
> mine is
> not so stuck that it couldn't bounce on a California freeway
> expansion joint
> (not to mention some of the rally roads), so I am using a bungee.
>
>
> Max Heim
> '66 MGB GHN3L76149
> If you're near Mountain View, CA,
> it's the primer red one with chrome wires
>
>>
>> Shesh - a few bucks gets you one of these generic battery brackets.
>>
>> http://www.haigh.com.au/images/ProductImages/BHS2.jpg
>>
>> Punch/drill a hole in either side of the battery box for the
>> uprights to hook
>> into and you are right. one of these holds my 12v battery in
>> pretty firmly on
>> a racetrack.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
