Sounds like the V8 pads or callipers. They have 'handed' pads in that the
inner is different to the outer on each calliper, and of course there was
the time I bought a set to find three inners and one outer ...
----- Original Message -----
> It seems the Classic Gold pads I bought don't fit. I forced them in enough
> to
> get the cotter pin in and figured it would seat itself correctly, but no,
> it
> didn't, the inside pads got stuck, and wouldn't move in the caliper.
> Measuring
> they are a good .02-.03 inches wider than the stock pads I pulled out.
|