Hi Friends,
Back in the garage for a bitB today.
You might remember that my '53 TD suffered a stuck valve and broken pushrod.
Well,B todayB I may have found the cause - or at least, a related problem: a
blocked, or at least restricted, oil feed line to the top end. After I cleaned
the exterior of the pipe and banjos, I sprayed brake cleaner (degreaser) into
the line ... and nothing came out the other end! On the second attempt, a
dribble turned into a weak black flow. With continued work, the line is now
clean and clear.
I can't swear that the stuck valve was related to oil starvation but I can
testify that little-to-no oil could have gotten through that line before I
cleaned it out.B
The line is now clean, inside and out, and sits in storage with new copper
washers and fresh banjo bolts, ready to be reinstalled. I'm now glad that I
bought the new oil flex line and pipe to the OP gauge, as the old ones may also
be full of crud.
-rick
Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just
like a BlackBerry.
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|