mgs
[Top] [All Lists]

Re: [Mgs] Failed ignition lock in '70 B.

To: ccrobins@ktc.com s=q20121106; t=1385796793; bh=Wi8lxeWfEuLsAdz7kEGmyLfYS6flivhJQr47EoZqazw=; h=Received:Received:Received:MIME-Version:Received:Received:Date: Message-ID:Subject:From:To:Content-Type; b=msFnCoXHjF05Owhvehgf7KrwGsi3hKX4JehVSLzuToTLVbXHylZw3Nr3onHRCrFq3 CD9gPsajs0/5/2Q1RBgSYeHLvcBOOfhZERi+T8/woks7B6sRgwKDSI0ftL2vu05qIw yHodUWCyXsQ9caIZs/LrFeZFTh5J7Xm4REMQrw1pYA9fbdPjyVsbJZI+GIG0IOoh93 SdTaTZ4rOUwi6R+WB7bu8PNDr82mYF3F1X38ssRzdWKk0XZs1cOfs9peJaIrRObBeu UEeULWvKTnq1akKa0+zHv/IHys4UJ8Zx+gAGp+IftesT/U3oJoGlplbZKNriJNPbQV aVJQYPmIFoNaw==
Subject: Re: [Mgs] Failed ignition lock in '70 B.
From: Andrew Lundgren <lundgren@byu.net>
Date: Sat, 30 Nov 2013 00:31:11 -0700
Cc: MG List <mgs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: mgs@autox.team.net
References: <52993AFC.5040702@byu.net> <529957ED.4090908@ktc.com> <52996260.7040206@ktc.com>
I'm not sure that is right. The keys on the sets of '70 locks that I have
are so different they won't even go in the key holes.

My '78 has three different keys, all original from the build sheet, and
they are very different as well.
 If it doesn't open 'em all it's prolly not the original.

CR
On 11/29/2013 9:13 PM, Charley & Peggy Robinson wrote:

> Does your key open the trunk & doors?
>
> CR
> On 11/29/2013 7:10 PM, Andrew Lundgren wrote:
>
>> The ignition lock in my '70 B has failed. It wasn't turning nicely for
>> quite some time.  I had to hold it all the way on and wiggle it to get it
>> to start for the past few months.  Finally, the wiggling trick wouldn't
>> work anymore.  I took it apart today expecting to have to replace the
>> switch. After doing so with a spare I had I found it would still not work.
>>
>> I turned the switch manually and it started up with no problem. I put the
>> spare switch in the spare lock assembly I have and it started up without
>> any problem.   So, I pulled off my ignition lock and put the spare lock and
>> switch in.  Everything is working fine now.  The shaft that comes though
>> the lock must not be in the right place any longer.
>>
>> However, I do not want to change the key in the car.  I don't know that
>> the ignition key is the original, but I also don't have any reason to
>> believe it is not.  (I don't know how may owners had it before me.)
>>
>> It is feasible to have the ignition lock rebuilt?  Are the rebuild parts
>> available?  (I am not inclined to do this one myself.)
>>
>> Thanks!
>> --
>> Andrew
>> _______________________________________________
>>
>> Mgs@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com
>>
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com
_______________________________________________

Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>