Tom,
Measurements off my '59 are:
13 3/8" - shelf to underside of shroud ( measurement in your photo)
12 1/8" - shelf to top of metal duct in front of its mounting bracket
9 1/8" - shelf to upper radiator mounting hole
FWIW, the front side of the duct bracket you fabircated is 3" in forward
of the rubber bonnet buffer hole that is in the bonnet channel.
Hope this makes sense and helps.
/S//afety Fast/,
Dave W.
Burlington WI
On 9/15/2014 9:47 AM, Tom McCay - Classic-Car-World Ltd wrote:
> Hi Guys, can someone confirm the vertical measurement of the Radiator duct
> panel on a MGA for me please?
>
> If possible taken from the underside of the shroud where the radiator mounting
> panels are fixed to an extended line to the top of the duct panel.
>
> I've replaced both inner wheel arches and the lower part of the radiator
> mounting panels have rotted away leaving me no reference to compare. As a
> rough measurement it looks to be about 14". The following link is an image of
> the measurement required:
>
> http://www.ccw-tools.com/uploads/mga/Radiator%20duct%20measurement.jpg
>
> Kindest regards
> Tom
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|
