mgs
[Top] [All Lists]

Re: [Mgs] B timing chain cover on A

To: Eric J Russell <ejrussell@mebtel.net>
Subject: Re: [Mgs] B timing chain cover on A
From: Mike Duvall via Mgs <mgs@autox.team.net>
Date: Mon, 27 Jun 2016 16:06:55 -0500
Cc: mgs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: mgs@autox.team.net
References: <mailman.3.1467050401.6182.mgs@autox.team.net> <0593788545C5445F8B425FDE43A5CDDD@EricJRussellPC>
Thanks for the suggestions but I didn?t go that far.  

On Jun 27, 2016, at 3:03 PM, Eric J Russell <ejrussell@mebtel.net> wrote:

>> I put an early B timing chain cover on my A with new thrower .
>> 
>> Oil now gushes in three streams out of the front of the engine.
>> 
>> Suggestions?   Am I missing anything,  better ways to line up the cover?? 
>> Thanks,  Mike
> 
> There isn't really oil under pressure in the timing chain area. The tensioner 
> gets oil under pressure which is then directed onto the chain. Oil gets 
> thrown around by the moving chain.
> 
> Did you do anything else in addition to the replacing the timing chain cover? 
> There is an oil galley plug partially hidden behind the engine front plate. 
> Did you remove that galley plug and forget to replace it?
> 
> See plug #9: http://www.mgaguru.com/mgtech/engine/of101a.htm
> 
> Eric Russell
> Mebane, NC
> 

_______________________________________________

Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>