--===============7842246701078206021==
boundary=Apple-Mail-40E7CB56-F5D5-4BA4-B18C-9CBBB9A68C53
Content-Transfer-Encoding: 7bit
--Apple-Mail-40E7CB56-F5D5-4BA4-B18C-9CBBB9A68C53
charset=utf-8
Content-Transfer-Encoding: quoted-printable
A bit of Permatex on the rivet=E2=80=99s shank before peening, perhaps? =20=
Bob
> On Aug 4, 2020, at 6:32 PM, David F. Darby <ddarby@centurytel.net> wrote:
>=20
> I did the same thing and mine weeps also,
> =20
> David
> =20
> From: Mgs [mailto:mgs-bounces@autox.team.net] On Behalf Of dwoerpel
> Sent: Tuesday, August 4, 2020 3:40 PM
> To: Eric Russell; mgs@autox.team.net; dave@ranteer.com
> Subject: Re: [Mgs] rivets without holes
> =20
> I did similar but the buck was an alloy. Worked well on the tubular rivet b=
ut I get oil leaking out the rivet holes. Re-did them using sealer but stil=
l leak.
> Any ideas before Dave rivers his and this Dave tries again?
> =20
> Thanks,
> =20
> Dave W
> =20
> '59 :()
> '59 MGA 1500
> =20
> Burlington WI=20
> "Pay It Forward"
> =20
> =20
> =20
> Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone
> =20
> =20
> -------- Original message --------
> From: Eric Russell <ejrussell@mebtel.net>
> Date: 8/4/20 1:32 PM (GMT-06:00)
> To: mgs@autox.team.net, dave@ranteer.com
> Subject: Re: [Mgs] rivets without holes
> =20
> I bought a package from McMaster-Carr a few years ago. I have lots left.
>=20
> Send me your mailing address & I will put a few in envelope.
>=20
> To set the rivets I made a buck with a length of hardwood. Drill a small=20=
> divot in the end, clamp the piece of wood in a vise, position the rivet=20=
> head in the divot - through the ID plate & valve cover and peen over the=20=
> end of the rivet. I started it by using a center punch in the end of the=20=
> rivet then peened it over with a ball peen hammer.
>=20
> Eric Russell
> Mebane, NC
>=20
> On 8/4/2020 2:00 PM, mgs-request@autox.team.net wrote:
> > Date: Tue, 4 Aug 2020 10:34:17 -0500
> > From: "dave" <dave@ranteer.com>
> > To: <mgs@autox.team.net>
> > Subject: [Mgs] rivets without holes
> > Message-ID: <003401d66a74$b83cc7f0$28b657d0$@ranteer.com>
> > Content-Type: text/plain; charset=3D"us-ascii"
> >
> > ISTR there was a thread a while back about rivets without holes in them
> > (i.e. solid tops). I need to rivet in the metal plates on the valve cov=
er
> > and I would like to do it correctly.
> >
> > =20
> >
> > Can someone help me out?
>=20
> _______________________________________________
>=20
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
>=20
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>=20
> Unsubscribe: http://autox.team.net/mailman/options/mgs/dwoerpel@wi.net
> _______________________________________________
>=20
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
>=20
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>=20
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com
--Apple-Mail-40E7CB56-F5D5-4BA4-B18C-9CBBB9A68C53
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><meta http-equiv=3D"content-type" content=3D"text/html; charset=3D=
utf-8"></head><body dir=3D"auto"><div dir=3D"ltr"></div><div dir=3D"ltr">&nb=
sp; A bit of Permatex on the rivet=E2=80=99s shank before peening, per=
haps? </div><div dir=3D"ltr">Bob</div><div dir=3D"ltr"><br></div><div d=
ir=3D"ltr"><br>On Aug 4, 2020, at 6:32 PM, David F. Darby <<a href=3D"mai=
lto:ddarby@centurytel.net">ddarby@centurytel.net</a>> wrote:<br><br></div=
><blockquote type=3D"cite"><div dir=3D"ltr"><meta http-equiv=3D"Content-Type=
" content=3D"text/html; charset=3Dutf-8"><meta name=3D"Generator" content=3D=
"Microsoft Word 14 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
span.EmailStyle17
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--><div class=3D"WordSection1"><p class=3D"Ms=
oNormal"><span style=3D"font-size:11.0pt;font-family:"Calibri",&qu=
ot;sans-serif";color:#1F497D">I did the same thing and mine weeps also,=
<o:p></o:p></span></p><p class=3D"MsoNormal"><span style=3D"font-size:11.0pt=
;font-family:"Calibri","sans-serif";color:#1F497D"><o:p>=
</o:p></span></p><p class=3D"MsoNormal"><span style=3D"font-size:11.0p=
t;font-family:"Calibri","sans-serif";color:#1F497D">Davi=
d<o:p></o:p></span></p><p class=3D"MsoNormal"><a name=3D"_MailEndCompose"><s=
pan style=3D"font-size:11.0pt;font-family:"Calibri","sans-ser=
if";color:#1F497D"><o:p> </o:p></span></a></p><div style=3D"border=
:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt"><div><div styl=
e=3D"border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><=
p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"T=
ahoma","sans-serif"">From:</span></b><span style=3D"font-size=
:10.0pt;font-family:"Tahoma","sans-serif""> Mgs [<a href=
=3D"mailto:mgs-bounces@autox.team.net";>mailto:mgs-bounces@autox.team.net</a>=
] <b>On Behalf Of </b>dwoerpel<br><b>Sent:</b> Tuesday, August 4, 2020 3:40 P=
M<br><b>To:</b> Eric Russell; <a href=3D"mailto:mgs@autox.team.net";>mgs@auto=
x.team.net</a>; <a href=3D"mailto:dave@ranteer.com";>dave@ranteer.com</a><br>=
<b>Subject:</b> Re: [Mgs] rivets without holes<o:p></o:p></span></p></div></=
div><p class=3D"MsoNormal"><o:p> </o:p></p><div><p class=3D"MsoNormal">=
I did similar but the buck was an alloy. Worked well on the tubular rivet bu=
t I get oil leaking out the rivet holes. Re-did them using sealer but s=
till leak.<o:p></o:p></p></div><div><p class=3D"MsoNormal">Any ideas before D=
ave rivers his and this Dave tries again?<o:p></o:p></p></div><div><p class=3D=
"MsoNormal"><o:p> </o:p></p></div><div><p class=3D"MsoNormal">Thanks,<o=
:p></o:p></p></div><div><p class=3D"MsoNormal"><o:p> </o:p></p></div><d=
iv><p class=3D"MsoNormal">Dave W<o:p></o:p></p></div><div><p class=3D"MsoNor=
mal"><o:p> </o:p></p></div><div><p class=3D"MsoNormal">'59 :()<o:p></o:=
p></p></div><div><p class=3D"MsoNormal">'59 MGA 1500<o:p></o:p></p></div><di=
v><p class=3D"MsoNormal"><o:p> </o:p></p></div><div><p class=3D"MsoNorm=
al">Burlington WI <o:p></o:p></p></div><div><p class=3D"MsoNormal">"Pay=
It Forward"<o:p></o:p></p></div><div><p class=3D"MsoNormal"><o:p> </o:=
p></p></div><div><p class=3D"MsoNormal"><o:p> </o:p></p></div><div><p c=
lass=3D"MsoNormal"><o:p> </o:p></p></div><div id=3D"composer_signature"=
><div><p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;color:#575757">=
Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone<=
o:p></o:p></span></p></div></div><div><p class=3D"MsoNormal"><o:p> </o:=
p></p></div><div><p class=3D"MsoNormal"><o:p> </o:p></p></div><div><div=
><p class=3D"MsoNormal"><span style=3D"color:black">-------- Original messag=
e --------<o:p></o:p></span></p></div><div><p class=3D"MsoNormal"><span styl=
e=3D"color:black">From: Eric Russell <<a href=3D"mailto:ejrussell@mebtel.=
net">ejrussell@mebtel.net</a>> <o:p></o:p></span></p></div><div><p class=3D=
"MsoNormal"><span style=3D"color:black">Date: 8/4/20 1:32 PM (GMT-06:00) <o:=
p></o:p></span></p></div><div><p class=3D"MsoNormal"><span style=3D"color:bl=
ack">To: <a href=3D"mailto:mgs@autox.team.net";>mgs@autox.team.net</a>, <a hr=
ef=3D"mailto:dave@ranteer.com";>dave@ranteer.com</a> <o:p></o:p></span></p></=
div><div><p class=3D"MsoNormal"><span style=3D"color:black">Subject: Re: [Mg=
s] rivets without holes <o:p></o:p></span></p></div><div><p class=3D"MsoNorm=
al"><span style=3D"color:black"><o:p> </o:p></span></p></div></div><p c=
lass=3D"MsoNormal">I bought a package from McMaster-Carr a few years ago. I h=
ave lots left.<br><br>Send me your mailing address & I will put a few in=
envelope.<br><br>To set the rivets I made a buck with a length of hardwood.=
Drill a small <br>divot in the end, clamp the piece of wood in a vise, posi=
tion the rivet <br>head in the divot - through the ID plate & valve cove=
r and peen over the <br>end of the rivet. I started it by using a center pun=
ch in the end of the <br>rivet then peened it over with a ball peen hammer.<=
br><br>Eric Russell<br>Mebane, NC<br><br>On 8/4/2020 2:00 PM, <a href=3D"mai=
lto:mgs-request@autox.team.net">mgs-request@autox.team.net</a> wrote:<br>>=
; Date: Tue, 4 Aug 2020 10:34:17 -0500<br>> From: "dave" <<a href=3D"m=
ailto:dave@ranteer.com">dave@ranteer.com</a>><br>> To: <<a href=3D"=
mailto:mgs@autox.team.net";>mgs@autox.team.net</a>><br>> Subject: [Mgs]=
rivets without holes<br>> Message-ID: <<a href=3D"mailto:003401d66a74=
$b83cc7f0$28b657d0$@ranteer.com">003401d66a74$b83cc7f0$28b657d0$@ranteer.com=
</a>><br>> Content-Type: text/plain; charset=3D"us-ascii"<br>><br>&=
gt; ISTR there was a thread a while back about rivets without holes in them<=
br>> (i.e. solid tops). I need to rivet in the metal plates on the v=
alve cover<br>> and I would like to do it correctly.<br>><br>> =
; <br>><br>> Can someone help me out?<br><br>___________________=
____________________________<br><br><a href=3D"mailto:Mgs@autox.team.net";>Mg=
s@autox.team.net</a><br>Donate: <a href=3D"http://www.team.net/donate.html";>=
5<br><br>Archive: <a href=3D"http://www.team.net/pipermail/mgs";>http://www.t=
eam.net/pipermail/mgs</a> <a href=3D"http://autox.team.net/archive";>http://a=
utox.team.net/archive</a><br><br>Unsubscribe: <a href=3D"http://autox.team.n=
et/mailman/options/mgs/dwoerpel@wi.net">http://autox.team.net/mailman/option=
s/mgs/dwoerpel@wi.net</a><o:p></o:p></p></div></div></div></blockquote><bloc=
kquote type=3D"cite"><div dir=3D"ltr"><span>________________________________=
_______________</span><br><span></span><br><span><a href=3D"mailto:Mgs@autox=
.team.net">Mgs@autox.team.net</a></span><br><span>Donate: <a href=3D"http://=
www.team.net/donate.html">http://www.team.net/donate.html</a></span><br><spa=
n>Suggested annual donation $12.75</span><br><span></span><br><span>Ar=
chive: <a href=3D"http://www.team.net/pipermail/mgs";>http://www.team.net/pip=
ermail/mgs</a> <a href=3D"http://autox.team.net/archive";>http://autox.team.n=
et/archive</a></span><br><span></span><br><span>Unsubscribe: <a href=3D"http=
://autox.team.net/mailman/options/mgs/mgbobh@gmail.com">http://autox.team.ne=
t/mailman/options/mgs/mgbobh@gmail.com</a></span><br></div></blockquote></bo=
dy></html>=
--Apple-Mail-40E7CB56-F5D5-4BA4-B18C-9CBBB9A68C53--
--===============7842246701078206021==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
--===============7842246701078206021==--
|