I found my passenger side front cab mount rusted out because of a leaky
windshield. I repaired it with lots of time and scrap sheetmetal. The back
cab mounts, especially the driver's side were cracked. This caused it to
lean a little on the rear driver's side. I used a piece of 1 by 1 box tubing
to strengthen this area.
----- Original Message -----
From: Charles Culver <sculver@iwl.net>
To: <oletrucks@autox.team.net>
Sent: Wednesday, November 24, 1999 12:31 PM
Subject: [oletrucks] Leaning cab
> In my quest for AD perfection, I have a small problem that I would like to
> remedy. The cab of my '50 3600 seems to lean a little toward the driver's
> side (No, not after I get in and sit down). Is this something for which
> there is an adjustment, or has anyone else had this problem, and corrected
> it?
>
> Thanks in advance-
>
> Smokey Culver
> '50 3600 5-window (mine) & '56 3600 (hers)
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|