[oletrucks] Chevy - 305 V8 Intake question

[Jennifer & Andy Brewster <brewsters@whtvcable.com>]

Kevin,

The FI intake is very different and will not fit on '86 and older
blocks. You can
tell the difference by a couple of ways. The center 4 blots are vertical
on Fi
intakes and the same bolts on carb intake are on an angle.  Were the
carb or TBI
bolts on, if TBI it will have 3 bolt holes, carb will have 4. There are
a couple
other way as well but this should tell you if it is a carb or TBI
intake. Hope
this will help.

Andy
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959