The rear I put under my 55 1st was more like 61 or 62 flange to flange.
----- Original Message -----
From: <Jeffros54@cs.com>
To: <rsain@gte.net>; <oletrucks@autox.team.net>
Sent: Wednesday, February 05, 2003 5:31 PM
Subject: Re: [oletrucks] Replacement rear end questions
> I finally got out and measured the S-10 rear end. (1988).
> Backing plate to backing plate is 47 3/4"
> Drum face to Drum face is 54 1/4"
>
> Hope this helps
> Later
> Jeff
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|