[oletrucks] door ajustment/alignment question

[SurfDudeSC@aol.com]

Hi group;
I'm having a problem getting the drivers side door, specifically the upper 
left "corner" area near the cowl.  Problem is I have the hinge holes adjusted 
all the way "out" but the door "corner" will not come out far enough with the 
cab to be flush.  Furthermore, the front of the door edge strikes and binds 
on the fender.  Any suggestions would be appreciated.  Thanks.
David
57 GMC 1/2 ton 
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959