Still need a food grill and emblem for a 55/56 GMC PU/Panel
Good to hear from you guys. I can't count the years I've been on this list.
Martin
-----Original Message-----
From: Oletrucks <oletrucks-bounces@autox.team.net> On Behalf Of GALE GORMAN
Sent: Tuesday, October 13, 2020 12:51 PM
To: Smokey Culver <smokey@railops.com>
Cc: oletrucks@autox.team.net
Subject: Re: [Oletrucks] Removal of cowl vent
Smokey,
The removal of the cowl vent on my 54 was pretty straight forward AFTER I
fabricated a rotisserie for the cab. I haven t worked on any of my projects for
about 5 years due to several surgeries on my right foot. I thought I would heal
quickly and that isn t the case. My cowl vent is out and on a shelf. Two little
bolts on each side and then two more of the same fasten the handle to the cowl.
I ll be 80 next month and I ve been thinking about liquidating this mess.
Gale Gorman
Houston
On Oct 13, 2020, at 12:39 PM, Smokey Culver <smokey@railops.com> wrote:
I need to remove the cowl vent from my 1950 3600 to clean up and replace the
gasket. Is there a video or some instructions for this?
Thanks!
Smokey Culver
League City, Texas
--
Charles L. "Smokey" Culver Charles L. Culver & Associates, LLP 2951 Marina Bay
Drive, Suite 130-474 League City, TX 77573 281-486-1859 Fax 281-486-2014 Email
smokey@railops.com _______________________________________________
Oletrucks@autox.team.net
Archive: http://www.team.net/pipermail/oletrucks
_______________________________________________
Oletrucks@autox.team.net
Archive: http://www.team.net/pipermail/oletrucks
_______________________________________________
Oletrucks@autox.team.net
Archive: http://www.team.net/pipermail/oletrucks
|