Re: rounded off nut removal

["Jim & D'Anne" <jvanho01@tir.com>]

I would suggest that you use hammer and chisel on the nut.  You should be
able to crack it and then remove it.

Jim V.

At 07:57 PM 2/6/99 -0500, McVintage@aol.com wrote:
>
>Suggestions wanted for removing rounded off nut where space and 
>clearance around the nut are VERY limited. Its at the flange joining
>diff to prop shaft on my TR6 - on the diff side of the flange.
>
>Thanks
>Jack Mc
> 
>