-----Original Message-----
From: Timothy Surdel <mambo_king47@hotmail.com>
To: shop-talk@autox.team.net <shop-talk@autox.team.net>
Date: Saturday, July 31, 1999 1:19 PM
Subject: '73 MG Midget Clutch Problems
>
>Installed new...clutch. No clutch pedal.
>
The method that has worked for me is to use a large syringe with a
short length of hose connected to the bleeder on the slave cyl. Fill
master cyl, open slave bleed and suck air/fluid out with syringe. May
take more than one try to get all the air out. Close the bleeder
between attempts. Don't run master cyl too low either...
Eric
1960 MGA
|