I guess it helps if I let you know where I am...
I'm located in Hunterdon County, NJ. It's the center of NJ (almost) About
1 hour from NYC and 1 hour from Philly.
Inch
mailto:epetrevich@relavis.com
jmark.vanscot
er@amd.com To: epetrevich@relavis.com,
shop-talk@autox.team.net
09/15/00 cc:
03:58 PM Subject: RE: 4000sq ft shop, was
Fancy
mechanic's gloves
Were are you?
Mark V.S. in Austin, TX
> -----Original Message-----
> From: epetrevich@relavis.com [SMTP:epetrevich@relavis.com]
> Sent: Friday, September 15, 2000 2:08 PM
> To: shop-talk@autox.team.net
> Subject: RE: 4000sq ft shop, was Fancy mechanic's gloves
>
> Well, I plan on it. Right now, I'm waiting for my T1 line to the new
> place
> (I'm in East BF and it takes forever) Once I have that, I'll bring my
> webserver back on-line (Megageek.com (which also has lots of archives
from
> this list)) then I'll post pictures.
>
> There are some problems with the shop. The prior owner used to run a
> roofing business out of it and the space is "cut up" with lots of poorly
> thought out walls and shelves. Half of the space is heated and air
> conditioned. I want to make the whole shop like that. Also, I have to
> beef
> up the doors (and make the entrances bigger, hence my other post about
> knocking down the concrete lip (which the air hammer works GREAT on,
> thanks!)
>
> I also plan on holding "classes" there next summer for local area
DIY'ers.
> (of course I'll invite anyone on this list that wants to go.) I've
> located
> a guy that is a top notch welder and mechanic. I've got another guy that
> is a wiz with electrical. Both will do it out of love for the craft!
The
> format is going to be find a person with a project like "my MG needs a
new
> dash." Then, that person will get all the parts and we'll set a date to
> do
> it. Everyone comes over for beer and pizza. Those that know what they
> are
> doing, help teach the newbies. This is the only "real" way to transfer
> knowledge like this. It works out great.
>
> I've been having them with local area motorcyclist for about 2 summers
now
> at my old place (some of those guys are on this list) and it goes well.
> It
> is also where I came up with the Oxy- Acetylene BBQ. 8>)
>
> Inch (who loves the new "Dot-Com Era!")
>
> mailto:epetrevich@relavis.com
>
> jmark.vanscoter@amd.com
> To: epetrevich@relavis.com, shop-talk@autox.team.net
> 09/15/00
> 02:08 PM
> Subject: RE: 4000sq ft shop, was Fancy mechanic's gloves
>
>
> "Inch" said he couldn't be happier with his new place and the 4000 sq.
> foot
> shop on the property
>
> Inch-
>
> How about some photos of your shop. Sounds like the ultimate shop to most
> of us.
>
> Mark V.S. in Austin, TX (who dreams and plan for a 4000sq. ft. shop)
>
>
>
|