Re: belt sanding - another question

["David C." <cavanadd@kendra.com>]

At 01:09 PM 8/19/2004 -0500, John Niolon wrote:
>I'm thinking aluminum oxide  or zirconium for the belt type but I'm lost on
>grit grade


I have a 9" disc, 6 x 48" belt sander from Grizzly.  It's the same machine 
that Enco and Harbor Freight use.  I use it on both wood and metal and 
usually use 48 to 60 on the disc, and usually 60 on the belt for nearly 
everything.

Here is an excellent source for belts:

http://www.woodworkingshop.com/

http://www.klingspor.com/default.htm

Dave C