Rich, unless you put down sand or some other traction material you will be
in a very dangerous situation each day, just the slighest bit of moisture
and away you go, think of the law suits you could be open for, not a good
idea as slippery as POR-15 is. "FT"
=================================================================================================
----- Original Message -----
From: "Eric J Russell" <ejrussell@mebtel.net>
To: "Rich White" <rlwhitetr3b@hotmail.com>; "shop-talk List"
<shop-talk@autox.team.net>
Sent: Monday, March 31, 2008 9:53 PM
Subject: Re: [Shop-talk] Other options for metal steps
> I'd vote for the POR-15.
>
> I've thought about the 'wearing off' factor of the topcoat required.
> While that is an issue I think it'd be fairly minor. The POR-15 (under
> an appropriate top coat) will protect all the other areas and a couple
> of layers of a durable top coat will provide the POR-15 with fairly
> long-lasting protection in the high wear areas. The treads thus might
> need occasional re-coating but they'd need it no matter what type
> paint is applied.
>
> Maybe the POR-15 could be top-coated with an epoxy paint - at least
> for the tread areas?
>
> Eric Russell
> Mebane, NC
> http://home.mebtel.net/~ejrussell
>
> ----- Original Message -----
> From: "Rich White"
>
>> Ok, I got a yes and a no on the POR-15 for my rusty steps,
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as frede.thomas2@verizon.net
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|