John,
I would have read the responses to be use anti-seize compound on the
threads, not necessarily on the smooth shaft. BTW, ARP says that loctite is
not usually necessary BUT if you do use it be certain to torque the
fasteners to their reccommended setting BEFORE the locktite sets up.
Hal
-----Original Message-----
From: shop-talk-bounces+hal=katemuir.com@autox.team.net
[mailto:shop-talk-bounces+hal=katemuir.com@autox.team.net]On Behalf Of
John T. Blair
Sent: Monday, May 05, 2008 4:37 AM
To: shop-talk@autox.team.net
Subject: [Shop-talk] Head studs
Thanks to everyone that replied. The concensus is to not use locktite,
but use some antiseize on the smooth shaft of the stud to keep
the head from sticking to the studs.
John
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|