Re: [Shop-talk] Basic MIG Welding questions

["Arvid Jedlicka" <arvidj@visi.com>]

My Lincoln PowerMig 300 doesn't have a purge setting but it does have 
preflow - two seconds of flow before the wire feeds - so by setting the wire 
feed down as far as it will go and pulling the trigger and then releasing it 
after a second - repeat four or five times - the plumbing is purged - I get 
to double check the flow on the gauge - and either zero or very little wire 
is wasted. 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive