Howdy,
On Wed, 23 Sep 2009, john niolon wrote:
> well , thanks for all the replies... liquid nitrogen...teeth pulling and
> all... guess I'll try the utility knife with the blade somewhat
> retracted and see what happens... my next try will be with a "V" type
> cutter and finally the tubing cutter.... the last sounds the easiest to
> me... reports from the emergency room to follow...
Actually, I find a regular razor blade to be the best... New/sharp. Just
press it into the insulation lightly, and roll it around. It doesn't take
much pressure.
Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|