shop-talk
[Top] [All Lists]

Re: [Shop-talk] Replacing a Door

To: 'Douglas Braun' <doug@dougbraun.com>, KVacek@Ameritech.net,
Subject: Re: [Shop-talk] Replacing a Door
From: Tim <tputland@charter.net>
Date: Tue, 9 Nov 2010 12:23:28 -0800
"planned obsolescence"...

I thought that was Microsoft's motto.


Tim
Dairyland Datsuns


---- Karl Vacek <kvacek@ameritech.net> wrote: 

=============
Most of us have prehung steel doors on our hangars at the airport, mostly
Mastercraft from Menard's because that used to be the only place nearby.
Just like Phil's experience, everyone's wood frame rots out under the
extruded plastic at the bottom of the side jambs.  I caulked mine thoroughly
and the caulk is still adhered and flexible, but the jambs are rotting
nonetheless.

It's a common enough problem that they sell a replacement frame kit.  And
they used to accuse Detroit of "planned obsolescence"...

Karl


From: pethier@comcast.net
Sent: Monday, November 08, 2010 21:59
Subject: Re: [Shop-talk] Replacing a Door

Put in a new prehung steel exterior door.  The one I have between my heated
shop and my cold garage has lasted these ten years OK.  

The one on the exterior of my garage has seen the effects of weather,
though.  The wood has gone wonky at the bottom.

Phil Ethier West Side Saint Paul Minnesota USA
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/tputland@charter.net
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>